White Horse Laboratories: Week 38 Quality Report

White Horse Laboratories: Week 38 Quality Report

In Week 38, White Horse facilitated USD242,884.44 in successful transactions!

Electrical Testing – 59% Passed

Physical Inspection – 48% Accepted

Week 38 once again saw a decrease in deliveries accepted after Physical Inspection and a higher failure rate in Electrical Testing. Both are trends we would like to see reversed.

Be on the lookout for the following high risk devices:

Note: high risk is defined as devices with over a 5% failure rate in electrical testing.

Integrated Device Technology ICS83PN156AKILFT, 100% failure – no ouput on the Q and nQ pins. High supply current above 140mA at no load.

Atmel AT45DB161D-TU, 26% failure – blank-check error and cannot be erased, one device with product ID error.

LEM LV25-P, 100% failure – high offset current at 0mA and 10mA input current.

Amel AT49SV322D-80TU, 20% failure – product ID and program/verify errors.

Infineon BTS724G, 5% failure – very low to no output current (should be 3A).

Quality drives a company’s reputation, its bottom line and above all, its value.

Contact our Quality consultants to discuss a Quality Assurance Program that will improve your bottom line. Email to: solutions@whitehorse-intl.com

Comments are closed

The Contributor

Have Your Say!

Which part of Shenzhen has the best quality of life for foreigners?

View Results

Loading ... Loading ...

  1. Etienne Ducrot: Hi, I’m interested to contact this Foundation. Do you know how? Thanks. Etienne
  2. Emma: Hi Jasmin, I’ve read your article about a new medical center opens in Nanshan at the end of this month....
  3. sherry lee: A simple story with great words…I love it.
  4. Evangeline: Awesome piece!
  5. Glenda: Hi there, I enjoy reading through your article post. I wanted to write a little comment to support you.